Syntan Based on maleic acrylic copolymer TDS
PRODUCT SPECIFICATIONS
Appearance: Transparent, pale, viscous liquid
Active Content (%): 28 ± 2
pH: 7.0 - 9.0
Light fastness: Good
Solubility: Readily soluble in water
SALIENT CHARACTERISTICS
Excellent fullness, plumpness, and roundness
Selective filling for loose areas
A unique combination of tight grain with low density (fluffiness)
Facilitates run and pliancy
MODE OF APPLICATION
The maleic acrylic copolymer has been specially designed for a soft segment of leathers, including upholstery, softy, shoe Nappa, and garment Nappa, where uniform fullness along with characteristic suppleness is intended.
Maleic acrylic copolymer helps naturally to get uniformity of effect in dry-milled and tumbled articles as well.
A percentage of 2-4% on shaved weight is normally recommended to be used after neutralisation in the dyeing bath.
When used in a percentage of 1-2% after fat liquoring before fixing, acrylic copolymer commendably regulates grain tightening, while the mellow handle remains satisfactorily intact.
STORAGE OF ACRYLIC COPOLYMER
Store it in tightly closed original packing. (between +5°C and +35°C). It is recommended to mix the product well before use. Please dispose of this product in the correct way, minimising the environmental impact.
Keep drums away from moisture, water, heat, acids, and oxidisers to avoid hazards. Decomposition caused by heat or contaminants may release Sulphur Dioxide and other toxic gases, which are extremely hazardous to human health.
Packaging and waste must be disposed of in accordance with local regulations.
For user safety, please refer to our safety data sheet before using the product.
Note: The information shared in this edition is believed to be accurate and refers to the laws, regulations,, and products as of the date of release. makes no express or implied representations or warranties with respect to the information contained herein. It is the sole responsibility of our customers to determine that the use of our product(s) is safe, lawful, and technically suitable for their applications. Because of possible changes in statutes or regulations, we cannot guarantee the status of products referred to here and above will remain unchanged.