Showing posts from April, 2021

Analytical Balance Calibration SOP | Moisture Analyzer Procedure

OBJECTIVE : To lay down the procedure for ANALYTICAL BALANCE operation. SCOPE This procedure applies to the Quality Control Department of QC.                                                    Responsibilities QC chemists Lab …

Kjeldahl Method for Nitrogen Content Determination

The  Kjeldahl method of nitrogen determination  is the worldwide standard for calculating the protein content in a wide variety of materials ranging from human and animal food, fertilizer, water, and fossil fuels.   {tocify} $ti…

E.T.P. Operating Procedure | How does ETP work

Collect the process effluent in the Collection Tank (CT) through the wire mesh screen (SC) provided at the inlet.  Open the air delivery valve located above the collection tank so as to mix the effluent through the agitation cau…

SOP for Chiller Operations | Chiller Start-up Procedure

To lay down the procedure for safe and efficient operation of cooled chillers. Scope This SOP applies to all cooled chillers in the facility. Responsibility The chiller operator is responsible for following this SOP. Accountabili…

SOP FOR S.T.P. | STP Meaning

The sewage water is collected in the first collection tank, after passing through the strainer  (Grill  Screen). Note 1: The materials like polythene bags, stones, etc. which can stop the passage of sewage  water should be…

SOP for Steam Boiler Operation

Operation for Steam Boiler and important Tips or Percutaneous. Check Points Before Start-Up 1.Ensure that soft water service tanks & Fuel oil service tanks have sufficient quantities of water & fuel. 2. Ensure that the dr…

Incompatible Raw Materials list

Raw Materials With Incompatible Materials and Characterization of raw materials. Hydrochloric  Acid with                    Caustic soda, KOH, Desil SK, Interol OPB, Monopeg 021, TMEC - 04, TMEC - 05, TMS - 05 Conc., DEA, TEA, ED…

Styrene Maleic Anhydride Properties

SMA 1000 is low molecular weight styrene, maleic anhydride copolymer with an approximately 1:1 mole ratio. SMA 1000 is available in flake or powder form.  SMA 1000 can be utilized to modify melt flow, improve coupling, and bett…

Preparation of 0.1 N Hydrobromic Acid Solution

Dissolve 8.0 gms of Hydrobromic acid in 200ml of glacial acetic acid in a 500ml volumetric flask. After complete dissolution makes up for to mark with glacial acetic acid. Standardization of HBr Solution   Analytically weigh…

Load More
That is All